PINZA DE DIENTES
- Número de material
- 3396886
- Línea de producto
- Accesorios
Descripción
The reliable asymmetric orange peel grapple KM 652/2 with half closing tines provides for an easy transport, resting flat against the crane arm and not pro-truding the width of the carrier machine. It is mainly used for handling scrap, waste and construction materials, and is available with five (KM 652-5/2) or six tines (KM 652-6/2) – depending on the task.
▷ Asymmetric construction: the grapple rests flat against the crane arm in its transport position. ▷ Special slot on the main carrier allows the transport of a big orange peel grapple, that does not protrude the width of the carrier (2,5 m).
▷ Half closing tines by default, completely closing at the points, for handling waste, scrap, loose materials, etc.
▷ Non-return valve garantees a secure retention of loads even when pressure drops.
▷ Long service life due to robust design – oil distributor and hydraulic hoses are protected in the center part, generously dimensioned bearings, wear- resistant shells made of 400 HB steel, cylinder with piston rod protection, stops for both end postitions of tines.
▷ Strong operation due to high closing forces
Detalles
- Altura (mm)
- 915
- Ancho (mm)
- 1.065
- Carga máxima (kg)
- 2.500
- Dimensión del accesorio del artículo
- o 4 x 140 MM, Ø 6 x 173
- Fuerza de cierre
- 13
- Número de dientes
- 5
- Peso (kg)
- 350
- Volumen máximo (litros)
- 240