CRANE FORK 3382672 - Lanzas de carretilla/ /tijeras | Partes & Accesorios Hiab En Línea

CRANE FORK

Número de material
3382672
Línea de producto
Accesorios

Descripción

Different tine spreads: besides the standard tine spread of 640-1600mm further tine spreads are available (up to 1000, 1830 or 2130 mm), depending on the sheets that have to be handled.

Safe transport of sheets of wallboard in the hinged lower section. The boards can be lifted and folded into a vertical position and clamped between the tines and frame, preventing them from sliding during handling.

Protection of the sheets during unloading through semi-tapered forged tines, equipped with rollers and pads. A standard centre slide gives an additional support point for your loads.

Security is assured even in case of a drop in pressure due to the integrated counterbalance valve that prevents the fork from opening unintentionally.

The hydraulic cylinder is equipped with a pressure relief valve to prevent overload.

Accurate positioning of the load is ensured by the tilt cylinder and the rotator.

The special version of the universal fork, the KM 461A with a second suspension point on the main beam enables the unloading of lying boards through narrow openings in the wall.

Detalles

Carga máxima (kg)
2.000
Dimensión del accesorio del artículo
Ø 69 MM
Extensión de torsión (mm)
640-1830
Peso (kg)
400
Profundidad de carga
460
Tipo de accesorio del artículo
shaft

Comprar un paquete

  • 3382672
    Nº de parte del artículo
    3382656
    3382664
    3382672
    3382681
    Carga máxima (kg)
    1.000
    1.500
    2.000
    2.500
    Dimensión del accesorio del artículo
    Ø 69 MM
    Ø 69 MM
    Ø 69 MM
    Ø 69 MM
    Extensión de torsión (mm)
    640-1600
    640-1830
    640-1830
    640-1830
    Peso (kg)
    340
    390
    400
    410
    Profundidad de carga
    460
    460
    460
    460
    Tipo de accesorio del artículo
    shaft
    shaft
    shaft
    shaft
    Detalle
    Variante actual