HIAB LOADER CRANE MANIPULATOR
A hydraulically operated attachment used for positioning tubes or poles, the KM 930 is for use on loader cranes with three functions. Flange mounting on the mechanical extension of the crane.
Through three hydraulic functions gripping, lifting and turning (rotation and tilting) of straight round poles (three hydraulic circuits are necessary). Unlimited angle of rotation.
Assured through continuous rotation, equipped with mechanically operating, hydraulic pilot controlled brake top revent unintentional rotation.
Of 500 kg up to 3000 kg can be handled by the KINSHOFER manipulators.
|Technical data||KM 930-500||KM 930-1000||KM 930-2000||KM 930-3000|
|Load capacity (kg)||500||1000||2000||3000|
|Gripping Ø, min./max. (mm)||100 / 300||100 / 300||250 / 600||250 / 600|
|Width B (mm)||785||1275||1365||1630|
|Number of tines||1||2||4||6|
|Self weight (kg)||235||310||865||1085|
|Closing force (kN)||11||23||25||39|
Package consists of manipulator, KINSHOFER rotator, hydraulic pilot controlled brake, non-return valve
Please note: tubes or poles have to be grabbed always in the centre of gravity
|Accessories||KM 980-2 KM||980-2 c|
|Description||Solenoid valve for additional oil circuit to change over to 3 circuits (for gripping, lifting, turning) when only 2 circuits are available, ready for mounting– 12 V or 24 V, working pressure max. 250 bar, oil flow 60 l/min (do-it-yourself assembly).||Solenoid valve KM 980-2 complete attachment kit including assembly components, hose guard, hoses and mounting on the KM 930 manipulator – 12 V or 24 V, working pressure max. 250 bar, oil flow 60 l/min.|
|Requirements of truck crane|
|Operating pressure (MPa (bar))||Max. 20 (200)|
|Pump capacity (l/min)||20 to 40